Netgear WiFi range extender not broadcasting SSID (network name) has become one of the biggest hurdles for a number of users around the globe as they are unable to get connected to www.mywifiext.net. There can be vast reasons why your Netgear range extender is not showing up the SSID (network name). In this write-up, we will make you familiar with all the reasons so that you can get rid of the issues in a short span of time. Here we go:
Reasons Causing Netgear WiFi Extender Not Broadcasting Network Name SSID Issue
Placement of your Netgear WiFi extender is not right
It has been found that if your Netgear WiFi range extender is installed far away from the range of your existing WiFi router, it will not broadcast SSID. Thus, place your Netgear extender at a location where it can easily fetch at least 30 percent of your existing router’s range.
Obstacles in the way of your Netgear extender
On the off chance if there are a number of interference-creating devices located close to your WiFi extender and router, then also you can experience Netgear extender not broadcasting network name (SSID) issue. To get it fixed, simply keep both your router and the extender away from the reach of such interference-creating obstructions like electronic devices, metal appliances, Bluetooth speakers, baby monitors, cordless phones, reflexive surfaces, etc.
Check the connectivity
The issue behind Netgear extender not broadcasting SSID can also be because of improper or discontinuous WiFi connections. To get that fixed, be sure your Netgear extender and router are properly connected with each other and rightly plugged into a working power outlet.
Cross-check the Netgear extender configuration
Ensure that you have properly completed the Netgear extender setup process. If your device is partially or improperly configured, then also the Netgear extender not broadcasting SSID issue can appear and ruin your surfing experience.
Update network drivers on your system
The network driver allows your system to communicate with your WiFi as well as the network adapters. In the event your Netgear Extender is not showing up network name (SSID) on your computer or laptop, it might be due to the corrupted WiFi network drivers.
Change the WiFi channel
In case you feel that other WiFi-enabled devices are interfering with your Netgear extender’s signals, then changing the WiFi channel is simply one of the most effective ways to fix the issue SSID not broadcasting issue for you.
Solved: Netgear WiFi Extender Not Broadcasting SSID Issue
If you are still facing the same issue, consider the following Netgear extender troubleshooting tips.
- Firstly, reboot your Netgear extender. When you plug the extender back in, make sure that the power LED on it is stable.
- If you have connected your Netgear extender wirelessly to the router, then consider connecting them with each other via Ethernet cable.
- Move your Netgear extender closer to the router. Besides, check the WiFi network option. If it is hidden, unhide it. Hiding a WiFi network is the better way to secure your WiFi network, but, it could result in the Netgear extender not broadcasting SSID.
- If you have tried all the troubleshooting tips and you are still unable to fix the issue, perform the Netgear extender reset process. But before going with the process, make sure to take a backup of Netgear Genie smart setup settings so that you won’t face issues while configuring your extender again.
That’s all folks! Do share with us which of the above-mentioned method helped you fix the issue. If you are still unable to overcome the issue, feel free to get in touch with our technical team via comments section.