Though your Netgear router is the better way to get WiFi everywhere, it is prone to technical glitches like any other wireless routers. The most common issue that every user is facing today with their Netgear router is that it keeps dropping the WiFi signals. It can be really annoying especially when you are working from home.

But you don’t have to worry. The issue can be fixed easily using the troubleshooting tips given in this how-to tutorial.

Here, we will provide you with the best solution on how to fix Netgear router keeps on dropping WiFi signals issue. Read on!

Don’t Use Wrong Or Incorrect SSID

After a successful Netgear router setup, it provides you a new WiFi network name (SSID). If your client devices are connecting to the router’s existing SSID instead of the new one, then chances are – this might lead you to the issue. To fix this, simply ensure that you are connected to the router’s new SSID.

Do Not Make A Faulty Connection

If you have connected your client devices to the router using an Ethernet connection, make sure that it is successfully established. On the off chance that the wired connection does not work, use a WiFi connection. For this, you have to connect your client devices to the router’s WiFi network.

To fix the wired connection issue, make sure that the Ethernet cable you are using is in proper condition.

Avoid Interference Of Other WiFi devices

If your router is placed to a location where it can easily catch the frequency of other WiFi devices then also it may result in the issue. So, the easiest way to fix this is to place your router to a location where other WiFi devices fail to reach it. The other devices here mean the devices of your neighborhood.

Secure Your WiFi Router

This is also one of the best ways to fix the issue. If your router’s security is set by default, we suggest to remove and secure it using your own credentials. Doing this will not only fix the issue but also keep your device away from dangerous viruses and malicious attacks.

Is Your Router Running The Latest Firmware Version?

Netgear WiFi routers come embedded with software called “Firmware”. This software can be corrupted if not updated timely and also become the cause behind the issue. To overcome with the issue, update Netgear router firmware. To do so, consider the following points given below:

• Power on your Netgear WiFi router.
• Open a computer or laptop.
• Enter router login IP address in the web browser’s address bar.
• Netgear router login portal displays.
• If the new firmware version is available, follow the on-screen prompts and update Netgear router firmware.

If you are a newbie, then we suggest – do not update the firmware on your device. For instant help, you can interact with our technical department.

Power Cycle Netgear WiFi Router

The easiest solution to get rid of the issue is to power cycle it. Worry about how to do so? Worry no more! We’ve got you covered. Just take the following steps into consideration!

• Unplug your Netgear router.
• Wait for about 5-10 minutes.
• Once done, plug the router back into the wall socket.
• The power LED on it will start blinking. It indicates that the process has been completed successfully.

If none of the above-mentioned troubleshooting tips help you resolve the issue, consider this last and final remedy.

Reset Your Netgear WiFi Router

Prior to resetting Netgear router, keep in mind that this process will delete all the customized settings i.e. routerlogin.net admin password, security settings, etc. made by you during the initial Netgear WiFi router setup process.

Here’s how to reset Netgear router:

• Power on your Netgear WiFi.
• Disconnect all the wired and WiFi connections you have made.
• Insert any pointed object like paper clip or pin into your Netgear router’s reset hole.
• Hold the Netgear router reset hole and release it after sometime.
• Thus, your Netgear router resets successfully.

To Conclude

So, these were some quick fixes you can take into consideration to troubleshoot with the issue. To check whether the issue is fixed or not, open a web browser and try to access router login page using 192.168.1.1 or www.routerlogin.netrouterlogin.netrouterlogin.net. If the issue continues to appear, share your concerns with us through the comments section.